Bridge Building Pneumatic Hook Draw Mesh Rebar Reinforcement Mesh Machine
Rebar Reinforcement Mesh Machine Introduction:
Rebar Reinforcement Welded Wire Mesh Machine adopts power electronic synchronous control technology, welding time and separate control welding are managed by automatic control system, human-machine interface, intelligent operation, humanization. Separate the welding transformer to reduce the requirement of power transformer.
Rebar Reinforcement Mesh Machine Features:
1. Control system Mitsubishi or Panasonic PLC automatic control system, combined with Weinview touch screen, can directly input and display equipment operating parameters, intelligent and easy to operate.
2. Weft wire hopper: the stepper motor drives the disk-type device to drop wires automatically, and the hopper has a large capacity of storing wires max up to 1.5 tons. When there is no cross wire in the hopper, the equipment will stop running automatically.
3. Sending longitudinal wire feeding mechanism: servo motor is equipped with planetary reducer to drive pneumatic compression wire feeding device to send wire to the welding position. The equipment is automatically welding.
4. Draw mesh mechanism: Japan Panasonic servo motor supporting planetary reducer drives pneumatic hook mesh pulling device to ensure the stability of the system and the standard size of the welded mesh. Automatic reciprocating mesh drawing can realize the production of lengthening size mesh.
5. Water-cooled welding electrodes and a new type of special water-cooling transformer welding mesh with epoxy resin are adopted, which is smaller in size and higher in safety and reliability than traditional transformers.
6. Low-voltage electrical appliances are made of Schneider, well-known brands to ensure the efficient and stable operation of the equipment.
7. The machine will stop working automatically if there is no cross wires in hopper device.
8. When there is malfunction on the machine, the PLC will alarm, which is convenient to adjust the machine.
9. The cross wire space adjustment adopts PLC micro-computer control, set on the touch screen.Very easy and convenient to operate.
10. The mesh pulling system is automatically calculated in cycle.No need manual setting. The mesh pulling car can be back to origin automatically after finishing the pulling mesh.
Rebar Reinforcement Mesh Machine Technical Parameters:
| Type | DX-GWCD-2000A | DX-GWCD-2500A |
| Welding speed | 45-60 times per min | 45-60 times per min |
| Line wire type | Pre-straighten and pre-cut | Pre-straighten and pre-cut |
| Cross wire type | Pre-straighten and pre-cut | Pre-straighten and pre-cut |
| Number of welding electrode | 24PCS | 30PCS |
| Material of welding electrode | CuCrZr | CuCrZr |
| Width of mesh | 2000mm | 2500mm |
| Length of mesh | 6m or 12m | 6m or 12m |
| Line wire space | 100-250mm | 100-250mm |
| Cross wire space | 100-300mm | 100-300mm |
| Draw mesh method | By servo motor | By servo motor |
| Machine weight | 6.5T | 7.6T |
| Machine dimension | 9.5*2.7*1.8m | 9.5*3.5*1.8m |
| Labor cost | Two workers | Two workers |
| Power transformer | 200KVA | 200KVA |
Rebar Reinforcement Mesh Machine Applications:
Bridge building, highway building, Road building, Engineering construction, campus construction and hospital construction.
Rebar Reinforcement Mesh Machine Photos:
Product Tags:
|
|
Bridge Building Pneumatic Hook Draw Rebar Mesh Welding Machine Images
|
